Replace Your Dated Lightbox

Easy DIY tips to replace fluorescent light in the kitchen ceiling. Give your kitchen an awesome makeover and upgrade with a beautiful chandelier or simple light fixture even if you have dropped or low ceilings with a t-bar system. via

When you are in the market to buy a copper sink to provide finishing of your bathroom or kitchen fittings, you need to have some things in mind to make an informed decision. With increasing demand for sinks, many manufacturers offer their products, so there is a large selection of sinks to choose from.

Let's discuss some important things to consider when buying a copper dish.


You can get copper containers in either "hand hammered" varieties or those mass-produced by machines. Washbasins that are hand hammered are made in small craft shops and their unique structure gives them a rustic appearance.

Their hammered texture not only gives beauty and character, but also strengthens the surface of the sink and helps to camouflage all the small marks that arise from daily use. On the other hand, machine-made sinks have a smooth surface and are available in factory-manufactured standard and rectangular shapes.


copper Purity

Ideally, copper containers should be made from 99 percent pure copper with 1 percent zinc to ensure its integrity and strength. You should check the cleanliness of the sink you are considering.

copper meter

The thickness of copper (both hand-hammered copper containers and those manufactured in factories) varies and has a significant impact on how sink sinks over time. Copper meters are measured by the thickness of the copper and are sometimes called weight per square foot.

You will find copper cups from 20 to 16 meters and most copper containers used in kitchens from 18 to 14 meters. A copper sink with lighter gauges will make a thin sound when water drums on the sink when the faucet is on. Apart from this, copper sinks with thin meters will easily be removed.


A good copper container is properly shaped. Even handmade that are perfect are never "out of round" or "out of square". Therefore, you should avoid it to appear deformed. Most of these sinks are often sold as others.

You should also look at the drain hole, which should be the right size to fulfill the code for your application. Many homeowners prefer sinks that have drainage holes in the middle. Large copper containers have drain holes on the side to allow the use of water at one end while pans and pots to be washed are stacked on the other side. Regardless of the drainage position, its bottom should lean gently toward the drain.

Surface - Which is the best, smooth or hammered?

When deciding on a sink with a hammered surface and one with a smooth finish, you should keep two things in mind. First is your own preference. A smooth copper container usually has modern or modernist styling. On the other hand, hammered sinks have handmade and warm appeal that fits well in traditional, ethnic and rustic decor.

Patinas and finishes

Copper cups in cups are available in a wide range of surface treatments from light cups (shiny new penny) to even dark chocolate patina. What you choose depends on your personal preference, but with a weather-beaten patina you can reduce the maintenance associated with a shiny copper dish, as it continues to change color.

Finally, companies you buy from should stand behind their products. Many high quality products are available online on many websites and with a little research you can easily find the best copper container for your needs.